My beacon is somewhat large and has a decent rank on Alder, but since I had my friend build a little beacon next to me, I’ve been getting the “Bridges multiple Settlements” message. I’m at -1571N 405E if anyone has ideas on how to fix this, but as a result we’re very confused.
This problem can occur when a beacon has thin spots connecting denser portions internally, or when two beacons are connected only by a 1 plot width connection.
It sounds like you probably need to make sure the connection between the two beacons is at least 2 plots wide.
2 Likes
Peyago
3
There is only one logical explanation. Your friend is an alien and trying to suction your prestige into the vortex!
Seriously though, I’ll come take a look at it and see where plots need added.
1 Like
Peyago
4
Here it is!
if you add a couple plots to make that single row into a double row, it should fix your issues. Its popping up because you have two different areas within that beacon connected by that single line of “roads”.
2 Likes
Thanks, I’m going to fix that.
1 Like
All the plots that are pink on the plot viewer are the issue. If they’re pink, they stink!
1 Like
To be honest, it’s the two white plots that are technically causing the issue.
Removing any one of those 7 plots would also stop the bridging.
