@onebitknightly – how exactly are you stuck? You’ve placed your beacon, but you can’t find it? Or you physically can’t get back to it?
It would be nicer if the colour showed the state to make it stand out more. What about?
100% - White
25% - 90% - Green
0 - 25% - Red
5 Likes
for the case that you cant find it just look in your inventory at the locations tab.
there you can find the coordinates @onebitknightly .
You’re right, we’re going to fix this.
4 Likes
That’s good advice.
Make sure you click on the location and see the co-ordinates in the pop up, because the display of the location in the menu is currently showing the wrong co-ordinates. That will be fixed soon.
1 Like
Good idea. And can you make the bar a bit more thick, if you play in a small window the bar is nearly not visible
1 Like
I found a Bug dont know if you got this alredy.
im playing with DS4 Controller directly connected to my PC without any xinput wrapper.
works fine by the way.
but
-
if i want to drop not needed stuff out of my inventory i have to klick the square butten to open the context menu, it will but in the same time it closes the whole inventory. after open the inventory again it shows both and i can click on DROP.
-
if i push L3(left stick) i can run faster but sometimes it toggles by one single click, sometimes it needs to double click but the most time i have to hold L3 (and evry ps4 player knows how annoying it is to hold the button wich you need to move)
1 Like
I apply for a badge called “Foreigner” for People who spek shít english like me 
1 Like
Your english is fine ^^
speak* 
Thanks for reporting the issues. These have been logged.
Can you give a specific example of this happening and the outcome if possible?
Could you provide more information on what this issue is?
How many times has this happened to you? Do you have any specific steps on how to reproduce this issue?
Could you provide a bit more detail plus any screenshots to explain what’s going on if possible?
This seems to happen every time you either die or log out. However, placing your beacon plots will preserve them. In order to reproduce you can:
- Start a new character.
- Level up a few abilities until you get some extra beacon plots.
- Log out or die.
- Your beacon plots should be reset to the starting maximum.
It also seems like you will randomly regain them from leveling up your abilities again. Haven’t nailed down a pattern on that yet though 
It happens if you mine on the ceiling and if you go 2 blocks or deeper into the ceiling. (So that you have a one block wide hole in the ceiling with blocks on all 4 sides). The mined blocks seem to get stuck on the edge of the blocks around them although it should be a flat wall.
Kind of similar to the bug where you could walk on a flat wall on the edge of the blocks that made up that wall.
Not the best screenshot. I’ll try to take a better one later. But if you look closely you can see some mined coal floating in the ceiling without any reason.
If you have a smart stack of iron in the compactor machine, it can not be made into compacted iron item until the smart stack is separated into multiple individual stacks.
This thread is now closed. Please report all Testing releases in the Testing 23 support thread.
1 Like